Our Courses

Course Overview:

This training program is designed to provide participants with the necessary skills and knowledge to provide basic medical care and emergency response procedures for vessel accidents. The program covers essential first aid skills, emergency response procedures, and relevant first aid regulations and standards that apply to the maritime industry.

Course Content:

1. Basic Medical Care: The program covers the necessary skills and knowledge required to provide basic medical care in emergencies on board a vessel. Participants learn about assessing patients, treating common injuries and illnesses, and providing appropriate medical care until advanced medical assistance arrives.
2. Emergency Response Procedures: Participants will learn about proper emergency response procedures for marine accidents, including the use of rescue equipment and communication protocols. The program covers the importance of emergency response plans and the role of each team member during an emergency.
3. Maritime First Aid Regulations: The training covers relevant first aid regulations and standards that apply to maritime industries. Participants will learn about the required first aid equipment and supplies on board a vessel, as well as best practices for compliance with regulations and standards.

Course Duration:

This training program has a duration of 8 hours, providing participants with the essential knowledge and skills needed to provide basic medical care and emergency response procedures for vessel accidents. By the end of this program, participants will have gained the necessary skills to respond to emergencies on board a vessel, comply with relevant regulations and standards, and provide basic medical care until advanced medical assistance arrives.

Course Overview:

The Forklift Operating Safety Training is a comprehensive course that provides participants with the necessary skills and knowledge to operate a forklift safely and efficiently. The training covers both the theoretical and practical aspects of forklift operation, including safe operating practices, legal and practical requirements, and how to handle loads safely and avoid accidents.

Course Content:

The Forklift Operating Safety Training course is divided into two main modules:

Module 1: Safe Operating Practices

• Introduction to forklift operation
• Understanding forklift controls
• Steering and braking techniques
• Handling loads safely
• Avoiding accidents and hazards

Module 2: Legal and Practical Requirements

• Workplace regulations and compliance
• Pre-use inspections
• Maintenance and repairs
• Operating in different environments and conditions
• Operator responsibilities and best practices

Throughout the training, participants will also have the opportunity to practice their skills through hands-on exercises and simulations.

Course Duration:

The Forklift Operating Safety Training course is a three-day program designed to provide participants with comprehensive knowledge and practical skills in forklift operation. The training is delivered through a combination of classroom instruction, interactive discussions, and hands-on exercises. By the end of the training, participants will have the necessary skills and knowledge to operate a forklift safely and confidently in any workplace environment.

Course Overview:

The Supervisor HSE Workshop Training is designed to equip supervisors with the skills and knowledge to effectively manage and lead their teams in ensuring a safe and healthy workplace. Participants will learn leadership and management skills, effective communication, problem-solving, and decision-making. They will also be trained on health and safety regulations, policies, and procedures that apply to their workplace, as well as the importance of compliance with legal and ethical obligations. Hazard identification and risk assessment, as well as the development and implementation of control measures to prevent accidents and injuries, will also be covered.

Course Content:

• Leadership and management skills
• Effective communication, problem-solving, and decision-making
• Health and safety regulations, policies, and procedures
• Compliance with legal and ethical obligations
• Hazard identification and risk assessment
• Development and implementation of control measures to prevent accidents and injuries

Course Duration:

The Supervisor HSE Workshop Training is a 3-day course that will provide participants with a mix of theoretical and practical training. Upon completion, participants will have the necessary skills and knowledge to effectively manage and lead their teams in creating a safe and healthy workplace.

Course Overview:

The working at height course is designed to equip individuals with the necessary skills and knowledge to work safely and effectively at heights. The course covers the legal requirements, risk assessment, and best practices associated with working at height. It includes both classroom-based instruction and practical exercises to ensure participants gain hands-on training with equipment commonly used in working at height.

Course Content:

The working at height course covers the following topics:

• Understanding the risks associated with working at height
• Identifying and assessing hazards
• Selecting appropriate equipment for working at height
• Proper use and maintenance of equipment
• Understanding legal requirements and responsibilities
• Developing safe work practices and procedures
• Emergency response and rescue procedures

Course Duration:

The working at height course is 3 days.

Course Overview:

The working at height (rescue) course is a specialized training program designed to provide individuals with the knowledge and skills required to perform safe and effective rescues in the event of an emergency while working at height. The course is specifically focused on rescue procedures, techniques, and equipment used in the event of an emergency.

Course Content:

The course content is designed to cover various topics related to working at height rescue operations. Some of the key topics covered in the course include:

Day 1:

• Introduction to working at height rescue
• Hazards associated with working at height
• Risk assessment and management
• Personal protective equipment
• Anchor points and anchor systems
• Basic rescue techniques and equipment

Day 2:

• Advanced rescue techniques and equipment
• Rope rescue systems
• Confined space rescue
• Medical emergencies at height
• Communication and coordination during a rescue
• Rescue planning and emergency response procedures

Day 3:

• Risk assessments for rescue operations
• Legal requirements and responsibilities
• Use and maintenance of rescue equipment
• Practical exercises and hands-on training with rescue equipment
• Written and practical assessment

Course Duration:

The working at height (rescue) course is a three-day training program. It includes both classroom-based instruction and practical exercises and hands-on training with rescue equipment commonly used in working at height. Upon successful completion of the course, participants should have a thorough understanding of the risks associated with working at height and be able to implement appropriate rescue measures to minimize the risk of accidents and injuries.

Course Overview: This comprehensive training program is designed to equip participants with the necessary knowledge and skills to effectively guide cranes and other lifting operations while prioritizing safety for everyone involved. The program covers critical topics such as risk assessment and planning, communication and coordination skills, and best practices for working with crane operators and other team members during lifting operations.

Course Content:

1. Directing and Guiding Cranes

• Overview of the role of a banksman in crane operations
• Understanding of the risks and hazards associated with lifting operations
• Best practices for safely directing and guiding cranes

2. Risk Assessment and Planning

• Importance of risk assessment and planning in lifting operations
• Hazard identification and risk assessment techniques
• Developing a lifting plan and permit-to-work review

3. Communication and Coordination

• Effective communication techniques for guiding crane operators
• Coordination of activities between the banksman and crane operator
• Communication with other team members, including riggers and signalers

 Course Duration: This course has a duration of 3 days, providing ample time for participants to fully comprehend the various aspects of banksman training. Upon completion of this program, participants will have gained valuable skills and knowledge that will enable them to work effectively and safely in crane operations.

Basic Hydrogen Sulfide (H2S) Traning

Previous
Next

Course overview:

This course on Basic Hydrogen Sulphide (H2S) Training is designed to provide participants with a fundamental understanding of the properties, hazards, and safe operating practices related to H2S. Participants will learn about the toxic effects and flammability of H2S, and gain an understanding of various methods of H2S detection and monitoring. The course will also cover safe operating practices to minimize the risk of H2S exposure, including the use of personal protective equipment and emergency response procedures.

Course content:

1. Introduction to H2S and its properties
2. Hazards associated with H2S
3. Toxic effects of H2S exposure
4. Flammability of H2S
5. Methods of H2S detection and monitoring
6. Interpretation of monitoring results
7. Safe operating practices around H2S
8. Personal protective equipment for working with H2S
9. Emergency response procedures for H2S incidents

Course duration:

The course duration is 4 hours and will be delivered through a combination of lectures, discussions, and hands-on activities. By the end of the course, participants will have a solid foundation in H2S properties, hazards, and safe operating practices, and will be better equipped to work safely in environments where H2S is present.

Course overview:

The Elementary First Aid Training course is designed to equip individuals with the necessary skills and knowledge to provide basic medical care and response to emergencies on board a vessel. Participants will learn about emergency response procedures for marine accidents, including the use of rescue equipment and communication protocols, as well as the relevant first aid regulations and standards that apply to maritime industries.

Course content:

1. Introduction to first aid in a maritime context
2. Basic medical care for common injuries and illnesses on board a vessel
3. Emergency response procedures for marine accidents
4. Use of rescue equipment such as life rafts, life jackets, and rescue boats
5. Communication protocols during an emergency
6. Understanding first aid regulations and standards that apply to maritime industries
7. Incident reporting and documentation
8. Scenario-based training exercises

Course duration:

The Elementary First Aid Training course is an 8-hour course that may include a combination of theoretical and practical components. Participants will gain hands-on experience in providing basic medical care and responding to emergency situations on board a vessel. Upon completion of the course, participants will receive a certificate of competence that is recognized by relevant regulatory bodies in the maritime industry. The course is designed to help individuals feel more confident and prepared to respond to medical emergencies and accidents on board a vessel, potentially saving lives and reducing the risk of further injury or harm.

Title: Fast Rescue Craft (Coxswain) Training for Maritime Emergencies

Course Overview: 

This training program is designed to provide participants with the knowledge and skills required to operate and navigate fast rescue craft to provide emergency response and rescue in maritime emergencies. The program covers rescue craft operation, emergency response procedures, and team management and leadership during emergency situations.

Course Content:

1. Rescue Craft Operation

• Understanding the principles of fast rescue craft operation and navigation
• Techniques for operating and navigating rescue craft in different maritime conditions
• Knowledge of rescue equipment and tools used in fast rescue craft operations

2. Emergency Response Procedures

• Understanding the proper emergency response procedures for maritime accidents
• Techniques for using rescue equipment and communication protocols during emergencies
• Best practices for communicating with emergency services and coordinating rescue efforts

3. Team Management and Leadership

• Learn how to effectively manage and lead a team during emergency situations
• Techniques for communication and coordination with the team and other emergency services
• Best practices for effective decision making and problem solving in emergency situations

Course Duration: 

This training program has a duration of 3 days, providing participants with ample time to acquire comprehensive knowledge and skills in fast rescue craft (coxswain) operations for maritime emergencies. By the end of this program, participants will have gained the necessary skills to operate and navigate fast rescue craft, understand emergency response procedures for maritime accidents, and lead and manage a team effectively during emergency situations.

Course Overview:

The H2S Properties and Precautions training course is designed to educate individuals on the properties of hydrogen sulfide (H2S), its physical and chemical characteristics, and the potential hazards associated with its release. Participants will also learn about the necessary precautions and measures to protect themselves against H2S exposure, including the use of personal protective equipment, gas detection equipment, and emergency response procedures.

Course Content:

The course covers the following topics:

• Properties and characteristics of H2S
• Physical and chemical properties of H2S
• Potential hazards associated with H2S release
• Precautions and measures to protect against H2S exposure
• Personal protective equipment for working in H2S environments
• Gas detection equipment and how to use them
• Emergency response procedures in the event of an H2S release or exposure

Course Duration:

The duration of the H2S Properties and Precautions training course is typically 4 hours. The training may include a mix of theoretical and practical components, allowing participants to gain hands-on experience in using gas detection equipment and responding to an emergency situation. Upon completion of the course, participants will receive a certificate of competence, which is valid for a certain period of time (usually three years).

Course Overview:

The International Maritime Dangerous Goods (IMDG) training is designed for individuals who are involved in the transportation of hazardous materials by sea. The course provides participants with an understanding of the dangerous goods regulations and requirements for safe transportation of hazardous materials, including proper labelling, packaging, and documentation. Participants will also learn about the hazards and risks associated with dangerous goods and how to prevent and respond to incidents during transportation by sea.

Course Content:

• Dangerous Goods Regulations: Understanding the regulations and requirements for the transportation of hazardous materials by sea, including proper labelling, packaging, and documentation of dangerous goods.
• Hazards and Risks: Understanding the potential hazards and risks associated with dangerous goods, including fire, explosion, and environmental damage, and how to prevent and respond to incidents involving dangerous goods during transportation by sea.

Course Duration:

The IMDG training typically lasts for 8 hours and may include a mix of theoretical and practical components. The course may also include case studies, group discussions, and hands-on activities to help participants apply their knowledge in real-world situations. Upon completion of the course, participants will receive a certificate of competence, which is usually valid for a certain period of time (usually 3 years).

Course Overview:

The Minimum Industry Safety Training (i-MIST) is a course designed for individuals working in the oil and gas industry to provide them with an understanding of essential safety practices, health and safety legislation, and environmental awareness. The course covers hazard identification, risk assessment, and control measures, and emphasizes the importance of environmental management.

Course Content:

• Essential safety practices and principles required to work in the oil and gas industry
• Health and safety legislation, regulations, and guidelines that apply to the oil and gas industry
• Industry-specific safety practices and procedures
• Environmental awareness and the importance of environmental management in the oil and gas industry

Course Duration:

The i-MIST course has a duration of 8 hours. The course may include a mix of theoretical and practical components, allowing participants to gain hands-on experience in identifying and controlling hazards and responding to emergency situations. Upon completion of the course, participants will receive a certificate of competence, which is valid for a certain period of time (usually three years).

Course Overview:

The Basic Rigging and Slinging course is designed to provide participants with the knowledge and skills needed to safely and effectively rig and sling loads. This course is important for individuals who work in industries such as construction, transportation, and manufacturing, where lifting operations are common. The course covers the safe and effective methods of rigging and slinging loads, the inspection and maintenance of rigging equipment, risk assessment, and control measures to prevent accidents and injuries during lifting operations.

Course Content:

• Safe and effective methods for rigging and slinging loads
• Proper use of equipment, rigging hardware, and load-carrying capacity
• Inspection and maintenance of rigging equipment
• Proper storage and handling of rigging equipment
• Risk assessment and control measures to prevent accidents and injuries during lifting operations

Course Duration:

The Basic Rigging and Slinging course typically takes 8 hours to complete, but the duration may vary depending on the training provider and the specific requirements of the industry. The course may include a mix of theoretical and practical components, such as hands-on demonstrations and simulations. Upon completion of the course, participants will receive a certificate of competence, which is valid for a certain period of time (usually three years).

Course Overview:

This training module provides participants with the necessary expertise to conduct audits and assessments for various international standards and frameworks such as Quality Management System (QMS) ISO 9001, Environmental Management System (EMS) ISO 14001, Occupational Health and Safety (OHS) ISO 45001, and Food Safety Management System (FMSM) ISO 22000.

Participants will learn auditing techniques and tools, as well as the roles and responsibilities of auditors, audit teams, and the auditee, including effective communication techniques and conflict resolution skills. The module emphasizes practical application of the concepts, principles, and techniques learned through case studies, role-playing, and interactive exercises, enabling participants to develop the necessary skills to manage the auditing process from start to finish and evaluate and recommend improvements to management systems in line with international standards and best practices.

Course Content:

1. Standards and Frameworks: Development of expertise in conducting audits and assessments for various international standards and frameworks such as QMS ISO 9001, EMS ISO 14001, OHS ISO 45001, and FMSM ISO 22000.
2. Auditing Techniques and Tools: Effective and efficient internal and external audit techniques and tools such as audit planning and preparation, audit conduct, and audit reporting. Comprehensive understanding of the roles and responsibilities of auditors, audit teams, and the auditee, including effective communication techniques and conflict resolution skills.
3. Real-world Application: Practical application of the concepts, principles, and techniques learned through case studies, role-playing, and interactive exercises. Participants will apply their newly acquired knowledge in real-world scenarios, enabling them to manage the auditing process from start to finish and evaluate and recommend improvements to management systems in line with international standards and best practices.

Course Duration:

This training module has a duration of 2 days, providing participants with ample time to acquire comprehensive knowledge and skills in conducting audits and assessments for various international standards and frameworks such as QMS ISO 9001, EMS ISO 14001, OHS ISO 45001, and FMSM ISO 22000.

By the end of this program, participants will have gained the necessary expertise to manage the auditing process from start to finish, evaluate and recommend improvements to management systems in line with international standards and best practices.

Course Overview:

 This training program is designed to prepare individuals for ISO certifications in Quality Management System (ISO 9001:2015), Environmental Management System (ISO 14001:2015), Occupational Health and Safety (ISO 45001:2018), and Food Safety Management System (ISO 22000:2005). The program provides participants with a comprehensive understanding of the requirements of each standard and how to implement them effectively in their organization.

Course Content:

Certification Preparation:

• Overview of ISO standards and certification process

• Requirements of each standard and how to prepare for certification

• Strategies for managing the audit process

Compliance Assurance:

• Understanding the requirements of each standard

• Developing and implementing processes to ensure compliance

• Assessing and improving your organization’s compliance with ISO standards

Continuous Improvement:

• Identifying areas for improvement in your organization’s management systems

• Setting objectives and measuring performance

• Driving ongoing improvement through the use of corrective actions and preventive measures

Course Duration:

This training program has a duration of 2 days, providing participants with ample time to gain a comprehensive understanding of ISO standards and the certification process. By the end of this program, participants will have gained the necessary knowledge and skills to navigate the certification process with confidence, ensure compliance with ISO standards, and drive ongoing improvement in their organization.

Course Title: 

Workplace Safety and Health Management for Managers

Course Description:

Managing safety and health in the workplace is a critical responsibility of managers. This three-day course provides an in-depth understanding of Workplace Safety and Health (WSH) management, and equips managers with the necessary skills and knowledge to develop and implement an effective Safety Management System (SMS) in the workplace.

Participants will learn how to identify and evaluate workplace hazards, assess risk levels, and implement preventive measures to mitigate those risks. They will gain an understanding of how to develop and implement an effective SMS to ensure the safety and health of employees in the workplace.

The course also covers legal requirements and compliance regulations related to workplace safety and health, ensuring that participants understand and meet their legal obligations. Real-life case studies and practical exercises will be used to demonstrate how to apply WSH management principles and techniques in real-world situations.

Upon completion of the course, participants will have the knowledge and skills to develop and implement an effective SMS and manage WSH in their workplace. This course is designed for managers, supervisors, and anyone who is responsible for managing safety and health in the workplace.

Course Duration: 3 days.

Course Title: 

Supervising Workplace Safety and Health in Marine and Shipyard Environments

Course Description:

•  Supervising workplace safety and health (WSH) in marine and shipyard environments requires specialized knowledge and skills. This three-day course provides supervisors with the necessary skills and knowledge to effectively manage WSH in a marine and shipyard environment.
• Participants will learn to identify hazards and conduct risk assessments in a marine and shipyard environment to ensure the safety and health of employees. They will also gain an understanding of marine and shipyard regulations and industry best practices to ensure compliance and promote safe work practices.
• The course covers incident investigation and reporting, including developing skills to identify the root cause of incidents and implementing corrective actions to prevent future occurrences. Real-life case studies and practical exercises will be used to demonstrate how to apply WSH management principles and techniques in a marine and shipyard environment.

Upon completion of the course, participants will have the knowledge and skills to effectively supervise WSH in a marine and shipyard environment. This course is designed for supervisors and anyone who is responsible for managing WSH in a marine and shipyard environment.

Course Duration: 3 days.

Course Title: 

Supervising Workplace Safety and Health in Construction

Course Description:

• Supervising workplace safety and health (WSH) in construction requires specialized knowledge and skills. This three-day course provides construction supervisors with the necessary skills and knowledge to effectively manage WSH at construction sites.
• Participants will learn how to develop effective construction safety management systems to ensure the safety and health of employees at construction sites. They will also gain an understanding of site management and supervision, including coordinating work activities, monitoring progress, and ensuring compliance with safety regulations.
• The course covers safety training and communication, including developing skills to effectively communicate safety requirements and promote safe work practices among employees. Real-life case studies and practical exercises will be used to demonstrate how to apply WSH management principles and techniques in a construction environment.

Upon completion of the course, participants will have the knowledge and skills to effectively supervise WSH in a construction environment. This course is designed for construction supervisors and anyone who is responsible for managing WSH in a construction environment.

Course Duration: 3 days.

Course Overview:

The Train the Trainer course is designed for individuals who want to become effective trainers in their organizations. The course covers adult learning principles, training needs assessment, and training evaluation. Participants will gain the necessary skills and knowledge to design and deliver effective training programs that meet the needs of their workforce.

Course Content:

• Understanding adult learning principles and how to apply them in training design and delivery
• Techniques for conducting training needs assessment to identify skill gaps and training requirements in the workforce
• Strategies for developing and delivering effective training programs to meet the identified needs
• Methods for evaluating training programs to assess their effectiveness and make improvements for future training initiatives

Course Duration:

The Train the Trainer course is a 5-day program that provides in-depth training and practical experience to help participants become effective trainers. The course includes a mix of theoretical and practical components, including interactive exercises, case studies, and group discussions. Upon completion of the course, participants will receive a certificate of completion.